Micro Edge Finders & Center Finders

The MICRO EDGE FINDERS, AUDIBLE EDGE FINDERS and CENTER FINDERS are available in 5 sizes with 1/4, 3/8, 10mm, 1/2 or 3/4 shanks (style "G" and "AG" have a step shank of 10mm/.375). They are hardened all over the ground on all working surfaces.

When the Edge Finder is zeroed in, the center of the spindle is one half the tip diameter when the tip jumps (approximately 1/32") sideways. The Edge Finder works equally well on round or straight surfaces. You may pick up a pointed surface by passing the rotating spindle past the point.

The Micro Center Finder will pick up cross lines to machine, drill or bore holes to a layout. The construction, similar to the Edge Finder, makes this tool more acurate than a wiggler and is more rigid.

The Combination Micro Edge Finder and Center Finder is the handiest tool of all as one instrument serves both purposes, and comes in two sizes 3/8" and 1/2" shank.

Maximum RPM for Edge Finders

Shank DiameterMax RPM
1/4, 3/8, 10 mm, 1/2 1500
3/41000
These Edge Finders should not be used in any high speed spindle.

Micro Edge Finders - Click on a product to purchase it

Image

Product

Price
Edge Finder 3/8 Shank X .2000 TIP Model"A" $10.00  
Edge Finder 1/2 Shank X .2000 TIP Model"B" $10.50  
Center Finder 3/8 Shank X Point Model "C" $10.00  
Center Finder 1/2 Shank X Point Model "D" $10.50  
Combo Edge and Center Finder 3/8 X .2000 X Point Model "E" $13.00  
Combo Edge and Center Finder 1/2 X .2000 X Point Model "F" $14.00  
Metric Edge Finder 10mm / .375 Shank X 10mm TIP Model "G" $11.50  
Metric Edge Finder 10mm Shank X 10mm TIP Model "H" $11.50  
Edge Finder 1/2 Shank X .5000 TIP Model"BB" $10.50  
Edge Finder 3/4 Shank X .7500 TIP Model"750" $16.00  
Edge Finder 1/4 Shank X .2000 TIP Model"250" $11.50  
Edge Finder 3/4 Shank X 1.500 TIP Model"HATTIP" $25.00  

We ship anywhere to Canada for a $10 flat rate. Contact us for all other international shipping rates.

We also use USPS for small domestic orders.